Nu-Lift Cleaner
- Description
- Features & Benefits
- Substrates
Nu-Lift Cleaner is a formulated with an environmentally-responsible mineral acid that is user friendly. Nu-Lift Cleaner does exactly what its name implies: it lifts out and removes dirt, alkalinity, efflorescence, hard water deposits, magnesium, and stains from surfaces like grout and natural stone without harming or discolouring.
- Removes organic deposits
- Balances low pH
- Safely dissolves: efflorescence, magnesium, lime deposits, soap scum
- 100% Biodegradable
- Can be safely used in confined areas
- Concrete surfaces
- Masonry surfaces
- Natural and cultures stone
- Grout
- Pool decks
- Walkways and driveways
SEMCO LIQUID MEMBRANE™️ APPLICATIONS
Nu-Lift Cleaner is required for substrate preparation when installing our SEMCO Liquid Membrane™️ over the following substrates:
- Concrete Pools / Ponds
- Metal / Aluminum
- Existing concrete surfaces
Download Product Datasheet
Application Instructions
Prep C (Tiles, Metal & Aluminum)
PREPARE YOUR SPACE AND GATHER YOUR MATERIALS
Ensure your surface is free of any debris. Gather all the products and tools needed for your project.
WASHING PROCESS
- Mix 1 part POWER CLEANER with 4 parts of water for POWER CLEANER SOLUTION 1
- Mix 1 part POWER CLEANER with 9 parts of water for POWER CLEANER SOLUTION 2
- Mix 1 part Nu-Lift CLEANER with 1 part of water
- Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate
- Apply the POWER CLEANER SOLUTION 1 mixture lightly with a pump sprayer and allow to sit for 2-3 minutes
- Scrub the surface using a scrub machine or nylon brush
- Rinse the surface off well and ensure no residue is left
- Apply Nu-Lift Cleaner solution and repeat all steps.
- Apply POWER CLEANER SOLUTION 2 and repeat steps for the procedure
ADDITIONAL INFORMATION
• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems
Prep D (Concrete Pools / Ponds & Bricks)
PREPARE YOUR SPACE AND GATHER YOUR MATERIALS
Ensure your surface is free of any debris. Gather all the products and tools needed for your project.
WASHING PROCESS
- Slightly wet surface with water prior to applying Nu-Lift Cleaner.
- Apply undiluted Nu-Lift Cleaner on to the surface. and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush.
- Rinse the surface off well and ensure no residue is left
- Mix 1 part Stone Soap with 4 parts of water and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush..
- Rinse the surface off well and ensure no residue is left.
ADDITIONAL INFORMATION
• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems